russian English French German italian spanish
OMAC Laser 300. Specifications. A photo.
other
OMAC Laser 300. Specifications. A photo.

OMAC Laser 300. Specifications. A photo.

 

OMAC Laser 300 - lightweight, compact administrative plane type, manufactured in 80-ies in the US in limited numbers, and is used for business air travel.

 

A photoOMAC Laser 300

 

Development of the aircraft OMAC Laser 300 began to lead at the end of 70-ies, with American aircraft designers recreated the very original design of the fuselage, in practice, which had no analogues in the world.

The aircraft OMAC Laser 300 has two pairs of wings - the first of them is located in the forward fuselage of the aircraft, and performs mainly the function of stabilizing, while the other is located in the tail section, which is not visually, and the tail function is performed by special formoobrazovanny profile wings.

 

OMAC Laser 300 photos (museum piece)

 

The OMAC Laser 300 powerplant is located at the tail end of the aircraft, and unlike most lightweight aircrafts, it does not pull but pulls, which requires some skill in controlling the aircraft on the ground. The OMAC Laser 300 aircraft powerplant uses the Pratt & Whitney Canada turbo-propellant PT6A-135A, which provides the aircraft with thrust in the 750 hp, which naturally allows the 6 to accelerate to high speeds - the maximum speed of the OMAC Laser 300 is 495 km / H, thus, the plane is capable to overcome distances to 3484 kilometers.

Initially, at the stage of designing the aircraft to be fitted with its two power plants - pulling and pushing, but later on it was decided to abandon iz-za lack of expediency in the second aircraft engines as a kakim-libo significant improvements of performance it would not It led.

 

A photoOMAC Laser 300

 

On board OMAC Laser 300 7 can accommodate up to people - two crew members and five passengers, which is quite acceptable given the fact that the aircraft belongs to the class of aircraft of an administrative type. If necessary, inner salon can be adapted for a particular customer, however, given the fact that only three aircraft, of any variety has not been done in the salon variations were built during the entire production period.

The aircraft OMAC Laser 300 has high maneuverability and good handling, at the same time, for the entire period of operation of the aircraft of any state of emergency was not related to the aircraft device detected.

In the middle of 90-ies specialists from the US aircraft company «OMAC» attempted to restart the production of aircraft of this model, however, for a number of unexplained reasons, the project was postponed.

 

Specifications OMAC Laser 300.

 

  • Crew: 2 person;
  • Passenger: 5 people;
  • aircraft Length: 9,02 m .;
  • Wingspan: 12,65 m .;
  • Plane Height: 3 m .;
  • Weight of empty aircraft: 1700 kg .;
  • Payload: 1200 kg .;
  • Maximum takeoff weight: 2900 kg .;
  • Cruising speed: 467 km \ h .;
  • Maximum flight speed: 495 km \ h .;
  • Maximum flight distance: 3484 km .;
  • Maximum flight height: 9200 m .;
  • aircraft engine Type: Turboprop;
  • Powerplant: Pratt & Whitney Canada PT6A-135A;
  • Power: 750 hp

 

Aircraft airlines

Avia.pro

Comments

CAPTCHA
This question is to determine whether you are a human automated spam submissions.
upstairs