Translated automatically from the French version of Kelclinic. Contact us for remarks, questions or help.
russian English French German italian spanish
slotted wing
other
slotted wing

Plane with slotted wing

 

Today, the article focuses on the application of slotted wings of airplanes. This wing of the pressure side can be separated from the others on the suction side by means of a continuous surface.

-Lift Here

In this case, the purpose of using such a wing was obtained by applying a pressure difference in the auxiliary devices, for example, in aerotrube. In this case can be considerably increased efficiency aircraft propeller motor group, as there is added the air turbine. It receives the total energy of the negative and positive air pressure in the two-way system of airplane wings. It's all happening in the guide plane and the slots for frontal air discharge into the turbine.

 

As for the metal wing shape, it has a surface in the base, which can be divided into several planes wing. For example, the lower frontal plane can take a positive pressure and inflate the conduct of the turbine through beveled slots.

Airplane wing with a slot

The upper frontal cavity is used to suction and discharge the exhaust air through the tapered slot. Here it is necessary to add that the phase of the rear suction removes inhibiting the formation of eddies or vacuum. When the turbine in the phase of resolution, it can be seen as reactive energy. In addition, it complements the power of screw motor group. Hence the conclusion that in this case is considerably accelerated flight. Moreover, controlled extraction phase may completely replace the ailerons.

 

It will be observed in case of an accident, and when other control functions partially missing. While the aircraft performs landing wings formed at both inhibitory vacuum. If the aircraft performs landing on the water, there may be created a positive pressure, but it is used to fill the balloons float.

Airplane wing with a slot

Slotted airplane wings are devices for opening and closing the gap. Here, there is a danger that the open slot device may stop to perform their actions. For example, if the safety device deteriorate. Icing may occur or action outside of the body. In this case it is necessary to carry out the landing of the aircraft at the open slot, which is very dangerous for the pilots.

 

Slot wing is designed to slow recovery, the rise and decline. Slots were invented for the airplane and to greatly increase the aerodynamic quality of the wing. It blowers, which are placed in the slots of the wings make the aircraft maneuverability.

Comments

CAPTCHA
This question is to determine whether you are a human automated spam submissions.
upstairs